• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Why is My Car Ignition Locked?

There are many reasons why your ignition may be stuck. The key might be dirty or may have a damaged wafer inside it. This can be fixed by sliding the key into and out of the cylinder a few times.

Another possibility is that the pins inside the lock cylinder have become stuck. You can tap the cylinder gently using a small tack hammer.

Check the Battery

If your car is in Park or neutral, but doesn't come on when you insert the key into the ignition, it may be a problem with the shifter switch for the transmission. You can fix this by moving the gear shifter up or downward to get the car ignition key replacement into gear.

If the car is still unable to turn, the problem could be due to the neutral safety cable or the transmission shifter. A mechanic or an auto locksmith can fix these problems.

It's also possible that the ignition cylinder is worn out. In time, both the ignition and key may wear out, making them difficult to insert or remove. A lubricant, such as silicon lock grease could solve this problem, allowing the wafers to slide into place.

The lint in your pocket and the adhesive from tapes that hold packages together can also build over the key, preventing it from sliding into the ignition. To solve this problem, you can try cleaning the key with a cloth or using an instrument cleaner, like Triflow. You can also try a spare key to determine if the problem is with the ignition or the key.

You can also try to tap the key using a small hammer when it's in the ignition. This will cause a small vibration that could be enough to loosen the ignition's wafers and let them slide into the right position. You must be cautious not to scratch the ignition cylinder or key.

If none of the suggestions above work, you should consult a locksmith for help in figuring it out. It could be that the key is damaged inside the ignition or it could be time to replace the whole thing. Locksmiths can make an alternate key if the issue is with the key. If the problem is with the ignition cylinder, the vehicle is required to be brought to a repair shop in order to get it replaced. These issues are generally simple to fix.

Check the steering wheel

A simple problem that can prevent the ignition from turning is a locked steering wheel. It can happen when an individual driver is unintentionally engaged with the steering wheel while they exit or enter the vehicle. This usually happens by pulling the wheel while holding it against their body. It can also happen when a passenger in the back seat accidentally engages it as they get out of the car.

Fortunately it's a simple fix that doesn't require a trip locksmiths or mechanics. First, make sure that the gear shift is in Neutral or Park. If it isn't, simply push or pull the shifter slowly until it shifts into one of these positions. It's also crucial to press the brake button or activate the handbrake prior to attempting to turn the key.

If the wheel isn't locked, a quick check of the steering column should confirm that the key is connected to the lock cylinder. This is typically identified by a small "Lock" label in the lower portion of the ignition circle. It is easily removed by gently jiggling the lock or pulling it down with moderate force. It is crucial not to apply too much pressure since this could cause damage to the key or damage a wafer inside the lock cylinder.

Another thing to try is using an additional key to determine whether it is able to disengage the lock. This could indicate that the key is worn out and no longer able engage the wafers in the lock cylinder. If this is the case then a professional at Karl Chevrolet Webster City will be able to create an appropriate replacement key.

If the key still doesn't engage after spraying penetrating lubricant it may aid. Apply a small amount of penetrating oil to the ignition and keyhole. Then, jiggle the key or tap it lightly to make sure it is working. If this doesn't work, you will likely need to see an expert at your local dealership for cars. They'll be able provide you with a new key and also replace the ignition cylinder in the event that it is required.

Check the Key

It could be that your key may be damaged if it doesn't turn in the ignition. You can clean any foreign material (lint from packing tape or adhesive) from the key. You may also try the key with rubbing alcohol or Goo Gone to see if it helps.

It could be that the lock pins inside are not moving properly when you insert the key. You can test a spare key by gently sliding it out of the ignition after having put it in. This should let you be able to feel and hear if internal lock pins move, which they should. If not, you could grease the pins using graphite powder. You can buy graphite in small tubes that can be squirted into the keyhole. This will allow the pins to slide into place as you insert the key, and will prevent them from getting stuck.

It could be that your key has become worn out or damaged and isn't able to connect with the pins inside the ignition cylinder. This could cause the cylinder of ignition to not to turn, which can prevent you from starting your car. If this happens, you will need to bring your car to a locksmith or repair shop for service.

If you're able to turn the car with a spare key, and you've eliminated any issues with the steering wheel or battery it could be because the ignition cylinder is worn out. Try to open the lock by using a blunt screwdriver or a handle of the hammer. Do not use the head. Sometimes, gently tapping the cylinder can free it up and allow you to turn your car key. If this doesn't work will happen, you'll have to get your lock's cylinder replaced by a mechanic.

Check the Ignition Socket

The ignition socket is the place where your key is inserted and removed when you insert it. It can get clogged up with debris, or simply wear and wear and tear. You can try squirting some silicon lock lubricant (like WD-40) into the ignition to make things move along.

You can also use a small hammer to gently tap the inside of the cylinder for ignition, to try to loosen or reset the pins which may be out of alignment. Again, be very careful not to overdo this, or you could cause serious damage to the ignition switch.

It is essential to ensure whether your car's transmission is set to park or neutral before you attempt this. Many newer cars come with an option to lock the steering wheel if it is not in neutral or in park. This can prevent the ignition key from being turned.

If you've tried all of this but can't get your key to turn it is most likely that the housing of your ignition cylinder needs replacement. Different vehicles have different methods of replacing the ignition cylinder, therefore it is crucial to follow the correct steps.

Generally speaking, this involves taking off the plastic cover that is placed over the steering column and ignition assembly. To remove this, you'll have to first adjust the tilt-wheel to its lowest position and then loosen any fasteners holding it in place.

After removing the cover, you'll need to remove the old ignition cylinder from the steering column. It is then essential to check the new one that you have purchased with the original one to make sure they are an identical match. Once this is done the new ignition cylinder can be installed in the same way that the previous one was removed.

It is possible that, despite our best efforts, an ignition can be damaged and require to be replaced. It is suggested that if this happens you contact an Tempe Locksmith. A locksmith can assist you choose the right replacement and ensure it is installed correctly so that your vehicle can begin again.