• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't get rusty or decay.

It is essential to clean and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and may even be fatal. It is essential to take the time to make sure that you are doing everything you can to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and generally fit into old frames very easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you plan to attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment, including thick gloves and eye protection. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass, so that any shards fall onto the fabric instead of landing on the floor where they can be trodden under and cause further damage.

It's a great idea to tape the gap once the glass has been removed. This will keep water and drafts from entering your home until a professional comes out to fix the window. It also acts as a barrier, preventing any intruders from gaining entry into your home. If the gap is large, you might want to consider using a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. In time, they could be affected by a variety of issues that include sagging. A sagging window can cause problems with light, draughts, and even security. It's important to take action immediately if you notice your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to open the windows so you can get at the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after having repositioned your hinges. If you're satisfied with the fit of the window, tighten the screws to keep them in the right position.

If you are unable to move the hinges, you may have to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to loosen. It is important to replace your seal as soon as you can to ensure that your uPVC window repair waterproof and draughtproof.

uPVC handles can also loosen up. Most often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. First, you'll need to close your window and do a test to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

It is crucial to take action if you get up each morning to find a smoky wall and wet floors. Windows that leak water do not only lead to the destruction of your home's structure but also undermine your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the problem is, the old caulking may need to be removed. When it is time to uPVC repair, you should avoid 'over-caulking'. This will only make your window more difficult to clean and decrease its energy efficiency.

Check that any drainage holes are free of debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more severe cases, you may need to replace the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and can quickly spread across the house.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is more related to the seal, not the frame. Again this can easily be repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it opens in the breeze. They can be easily replaced by any competent DIYer and can be completed in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It's very simple to change the hinges on a window, but it's easier if someone helps hold the frame.

Verify that the uPVC hinges are closed and open in the correct direction. You can do this by looking for the arrows on each hinge. This shows which way the window should open.

The problem with the hinges on windows can be caused by incorrectly opening the window in a particular way or by improper installation in the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be pleased to offer you suggestions.

It is also crucial to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also prevent corrosion and reduce the risk of sticking. It is recommended to perform this every year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different things. The hinges may also become disaligned as a result of wear, creating a gap between the frame and sash. If they're beyond repair, it could be necessary to have them realigned. The interlock may be misaligned. This is located on the hinge's side, and may need to be cleaned. In some instances it might be necessary to replace the hinges.

The second most frequent cause of draughts is the window seals. These are susceptible to being worn out or damaged over time and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures, and reduce the risk of draughts.

Another, and most effective ways to reduce drafts is to use an draught excluder. These are typically fabric tubes which are filled with a type of filler. They can be put on the windowsill on top. They will keep your home warm by blocking cold air.

With a little regular maintenance and repairs, your upvc windows will provide an excellent level of security and insulation for your home. It is crucial to realize that all windows have a life span and eventually, they will reach an point at which it is more efficient to replace them than repair them. So, if you're experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional as soon as you can.